Skype Me™!
E-CatalogSitemap|Language : 
Company Products Finished Worldwide Exhibitions Video Download Contact Us

YD-200-4R3

YD
YD
Inquiry
  • Specifications
  • Features
  • Sample
INJETCION SELECT
Injection Select Size I II
NO B.C.D.E B.C.D.E
CLAMPING UNIT
Clamping Force tf 200(100x2)
Min. Mold Height mm 300
Clamping Stroke mm 300
Max. Mould Space mm 600
Rotary Diameter mm Φ 1172
Hydraulic Ejectior Force tf 3.3
Ejector Stroke mm 130
GENERAL
Driver Motor Kw(hp) 37.3(50)
Oil Tank Capacity I 660
Dimension of Machine (L x W x H) m 2.7 x2.0 x 4.3
Weight of Machine t 12.4
INJECTION UNIT A B C D E F G H I
Screw Diameter mm Φ20 Φ26 Φ26 Φ32 Φ28 Φ36 Φ32 Φ40 Φ34 Φ42 Φ38 Φ50 Φ42 Φ50 Φ46 Φ55 Φ55 Φ65
Injection Pressure kgf / cm2 1714 1014 1988 1312 2008 1215 1914 1225 1931 1265 2079 1200 2000 1411 2034 1423 2082 1491
Injection Capacity cm3 25 42 55 84 83 137 124 194 149 228 204 353 276 392 365 522 593 829
Max. Injection Weight (P.S) gr 22 38 50 75 74 123 112 175 134 205 183 317 249 353 328 470 534 746
oz 0.77 1.33 1.7 2.6 2.6 4.3 3.9 6.1 4.7 7.2 6.4 11.1 8.7 12.4 11.5 16.5 18.8 26.2
Injection Rate cc / s 30 52 35 52 47 78 56 88 70 108 81 141 109 154 128 193 258 236
Screw Rotation Speed r.p.m 0~150 0~155 0~165 0~160 0~160 0~150 0~150 0~150 0~150
Heater kw 2.0x2 3.5x2 4.5x2 6.0x2 7.5x2 9.0x2 11x2 13x2 15x2
*Figures shoen herein are subject to changs without notice.
*Screw and clamping force can be design as customer's request.
top

A. Standard double injection

    Vertical 4-columns direct-pressure clamping. In the upper mold plate, two separate vertical injection units is installed(separate injection hydraulic oil route) with the addition of round disc for this double injection machine.
  • Clamping force is 90TON ~ 500TON. Computerized and exclusively configured hydraulic system is used, which is more suitable for the production of general products( or special double-material) injection molding.
  • Two molds are installed on the upper mold plate while two lower molds are installed on the disc. When molding, the disc rotates alternatively at 180°to complete the two-color (two-material) injection molding or overmolding.
  • Highly efficient disc with water jacket device in the middle for cooling of the lower mold.
  • Expandable computer programs and special multistation disc (i.e. two upper molds and four lower molds). In the two lower modes, automated embedding and removing devices can be installed optionally to achieve automation of the whole machine work and increase production efficiency.

B. Other double injection machine

  • Type 1: A set of independent vertical “injection units” is added onto the upper mold plate of the original injection machine to form a double injection machine.
  • Example: YH / YR / YC models + vertical injection.
  • Type 2: On the original injection machine, one or more sets of independent horizontal (level) injection units is combined to form a double injection machine.
  • Example: YH / YR models + horizontal injection.
  • Type 3: The two-colors injection molding machine is combined to form a double injection machine by sharing a common disc.
  • Example:
      a. YH model + YT model + disc (2 ~ 4 stations)
      b. YH model + YH model + disc (2 ~ 4 stations)
top

Hardware & Household Item

                 
                 
                 

Auto & Glass

                 
                 
               

Consumer Electronics

                 
                 
                 
                 
         

Double Injection

                 
                 
               
                 

Other